Check the usable power
Distinguish annual consumption from peak simultaneous power and from the loads that must be supported in backup mode.
View optionsPV equipment · nationwide delivery
10 kW PV system with battery
For a three-phase configuration of approximately 10 kW, the choice of inverter, the distribution of panels across the MPPTs and the battery capacity must be considered as a single system.
The products are shown as configuration elements, not as a promise that they automatically form a compatible kit.
- ≈ 10 kW
- indicative PV power
- Three-phase
- typical architecture
- 7.7+ kWh
- indicative modular storage
Make an informed choice
The three decisions that shape the configuration
Design the strings
The number of modules per string is calculated from Voc, Vmp, temperature and the limits of each MPPT.
View optionsSize the battery
Choose the battery capacity and power based on the evening profile and the actual backup objective.
View optionsSelection from our shop
Relevant components for a 10 kW three-phase configuration
The panel, the inverter, the high-voltage battery module and the BMS/base are separate products. Confirm the permitted number of modules and firmware compatibility.
AIKO SOLAR
AIKO 645 W Solar Panel, 23.9% Efficiency
Regular price725,03 lei
VAT included
HINEN
Hinen 10 kW Three-Phase Hybrid Inverter
Regular price6.988,44 lei
VAT included
HINEN
Hinen HV Three-Phase 7.7 kWh Battery Module, without BMS
Regular price8.830,81 lei
VAT included
Hinen
Hinen HV Three-Phase 7.7 kWh BMS Unit and Base — Battery Module Not Included
Regular price1.872,46 lei
VAT included
Before you order
Checklist for 10 kW three-phase
A correct configuration must pass the electrical test, the consumption test and the compatibility test at the same time.
Talk to a consultant: 0723 172 359- Approved three-phase power and phase imbalance
- Annual consumption plus load peaks
- Voc/Vmp at the minimum design temperature
- Maximum current accepted per MPPT
- Battery charge and discharge power
- Space, ventilation and installation conditions
Clear answers
Questions before you buy
These answers explain the commercial and technical limits of the choice. The product specification and the confirmed quote remain decisive.
How many panels go into a system of approximately 10 kW?
The number depends on the module's rated power. The arithmetic result must be adjusted to the inverter's voltage, current and power limits and to the roof geometry.
Is a three-phase inverter required?
The choice depends on the grid connection, the approved power, how consumption is distributed and the project requirements. For three-phase projects, the solution is validated with the designer or a licensed installer.
Can I start with a single battery module?
The minimum and maximum number of modules is set by the battery architecture, the BMS and the inverter. Do not assume any module can operate on its own; check the documentation for the exact combination.
Do the prices include design and installation?
No. The prices on the product cards are for the products themselves, as described on their pages. Design, protection devices, accessories and installation are agreed separately.
Check before you pay
Choose equipment that works together
Send us your consumption, grid connection details and the products you already have. We will confirm what needs to be checked in the commercial configuration.