List the loads
Note the power, operating hours and starting peaks of each appliance.
View optionsPV equipment · nationwide delivery
In an off-grid system, the available energy is limited by seasonal generation, battery capacity and inverter power. Sizing starts from the loads that genuinely need to be powered.
No off-grid configuration guarantees unlimited autonomy; weather, temperature and the consumption profile all change the outcome.
Make an informed choice
Note the power, operating hours and starting peaks of each appliance.
View optionsConvert consumption into kWh/day and keep a realistic reserve for days with low generation.
View optionsIdentify the essential loads and an alternative source, if an interruption is not acceptable.
View optionsSelection from our shop
This selection is a starting point. For off-grid operation, the backup/EPS function, surge power, battery compatibility and behaviour without the grid must be explicitly confirmed.
Before you order
The more accurate the inventory of loads, the lower the risk of shutdowns and the cost of oversizing.
Talk to a consultant: 0723 172 359Clear answers
These answers explain the commercial and technical limits of the choice. The product specification and the confirmed quote remain decisive.
It depends on the loads, simultaneous use and the energy available in the battery. The 5 kW rating describes only part of the system and does not guarantee the energy needed over a full day.
Capacity starts from the daily consumption that must be covered without sun, then is adjusted for usable energy, temperature, losses and a safety margin.
Only if the inverter and the project design provide for this function. The input, automation and operating rules must be checked against the equipment documentation and by a licensed specialist.
No. They are relevant components from our catalogue. Protection devices, cables, mounting structure, number of panels and battery configuration are determined separately for each project.
Check before you pay
Send us your consumption, grid connection details and the products you already have. We will confirm what needs to be checked in the commercial configuration.